Kullanıcı:Myxomatosis57/Plazmon: Revizyonlar arasındaki fark

İçerik silindi İçerik eklendi
Değişiklik özeti yok
118. satır:
 
===The ''Y'' Smith chart===
''Y'' Smith abağı ''Z'' abağına benzese de bu grafikte normalize admitans kullanılır. Normalize admitans ''y''<sub>T</sub>, normalize empedans ''z''<sub>T</sub>'nin çarpımsal tersidir:
The ''Y'' Smith chart is constructed in a similar way to the ''Z'' Smith chart case but by expressing values of voltage reflection coefficient in terms of normalised admittance instead of normalised impedance. The normalised admittance ''y''<sub>T</sub> is the reciprocal of the normalised impedance ''z''<sub>T</sub>, so
:<math>y_\text{T}=\frac{1}{z_\text{T}}\,</math>
Bu göz önünde bulundurularak
Therefore:
:<math>y_\text{T} = \frac{1-\Gamma}{1+\Gamma}\,</math>
ve
and
:<math>\Gamma = \frac{ 1 - y_\text{T} }{ 1 + y_\text{T} }\,</math>
eşlenikleri yazılabilir.
The ''Y'' Smith chart appears like the normalised impedance type but with the graphic scaling rotated through 180°, the numeric scaling remaining unchanged.
 
''Y'' Smith abağı normalize empedans grafiği ile aynı şekilde gözükse de ölçeği 180° döndürülmüştür; numerik ölçeği aynı kalır. ''x'' aksının üstündeki bölge kapasitif, altındaki bölge de endüktif admitansları gösterir. Kapasitif admitansların sanal kısmı pozitif, endüktiflerin ise negatiftir.
The region above the ''x''-axis represents capacitive admittances and the region below the ''x''-axis represents inductive admittances. Capacitive admittances have positive [[Imaginary number|imaginary]] parts and inductive admittances have negative imaginary parts.
 
Hattın sonunun tamamen eşlenmesi durumunda empedans abağında olduğu gibi yansıma katsayısı sıfırlanır; hattın açık veya kısa devrelenmesi durumunda voltaj yansıma katsayısı birim çemberde bulunur.
Again, if the termination is perfectly matched the reflection coefficient will be zero, represented by a 'circle' of zero radius or in fact a point at the centre of the Smith chart. If the termination was a perfect open or short circuit the magnitude of the voltage reflection coefficient would be unity, all power would be reflected and the point would lie at some point on the unity circumference circle of the Smith chart.
 
===Practical examples===